Three components of gas source processor
Durable and Compatible Solenoid Valves
Solenoid Valves
Solenoid valves are used as automatic basic components to control fluids and belong to actuators. They are not limited to hydraulics. Solenoid valves are used in control systems to regulate the direction, flow rate, and other parameters of the medium. Solenoid valves can be combined with different circuits to achieve the desired control, ensuring both precision and flexibility in control.
Longer Filter Life AFC-200 Filter
Compressed air from the air compressor station is filtered and reduced in pressure before being delivered as clean, low-pressure air to instruments. This is also known as an air source treatment filter pressure reducer valve.
Feedback Signal of the Positioner Limit Switch APL-210
The valve positioner generates rotation through the coaxial connector or feedback rod, causing the cam to activate the micro switch. This, in turn, allows the micro switch to be triggered by the cam, sending switch signals to the external through the terminal block, and displaying locally through the indicator.
APL-210 Mini Limit Switch Box/APL-210N Features
-The switch is installed independently, making maintenance and replacement easy
-Durable and compact design
Die cast aluminum body
-Quick set cam mechanism
Spring fixed cam
Setting without tools
No need to adjust after initial setup
-Easy to install
NAMUR Stainless Steel Shaft and Bracket
Reasonable design of bracket connection holes and easy installation
APL-210 Mini Limit Switch Box/APL-210N Installation instructions
If actuator 4 is in the closed position, switch box 1 should confirm that it is displayed in the CLOSED position, align with the groove on multifunctional indicator 3 through a suitable height connecting bracket 2, and install it using four bolts
